Clear-Com TEMPEST 2400 Dokumentacja Pobierz pdf (Strona 75)

Clear-Com Communication Systems Page 75 of 100

Tempest 2400 Wireless Intercom System

Talk Button A/B and C/D

There are two Talk buttons on each beltstation, one for

channel A or B and the other for channel C or D. The

Talk button enables the microphone signal for the

assigned intercom channels A/B and/or C/D.

Tempest uses an intelligent latching method for Talk

buttons. Pressing the Talk button momentarily will cause

the Talk button to latch. Pressing and holding the Talk

Button for more than two seconds will cause the button to

act as a momentary switch.

Channel Indicator LEDs A/B and C/D

Each Talk button has two individual LED indicators. Together they

surround the Talk button. The LEDs will flash blue to indicate

which intercom channel, A or B, C or D, has been selected and will

illuminate continuously to indicate that Talk is enabled on that

channel.

The Channel Indicator LEDs will flash red when the microphone signal is reaching a peak level and is

entering into limiting.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 99 100

Brak uwag

Clear-Com TEMPEST 2400 Dokumentacja Strona 75