Clear-Com TEMPEST 2400 Dokumentacja Strona 62
- Strona / 100
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Clear-Com Communication Systems Page 62 of 100
Tempest 2400 Wireless Intercom System
Remote Transceiver
Setup the Transceiver
• Choose a base station location.
• Choose a Transceiver location.
• Choose an antenna configuration.
• Install CAT-5 cable and connect to the base station and Transceiver.
• Confirm operation by observing the Transceiver LEDs.
The Tempest Remote Transceiver is an optional accessory that allows antennas to be located up to
1,500 feet away from the base station without the RF signal loss that is associated with using long runs of
coaxial cable.
The Tempest Remote Transceiver connects to the rear of the base station with standard CAT-5 wiring
with RJ-45 connectors. Note that there are two RJ-45 connectors on the back of the base station and
they are not interchangeable. The second RJ-45 is for a LAN connection.
Install the base station in a convenient location.
Install CAT-5 cable so that it is protected from electronic interference as much as possible.
Install the Transceiver and antennas in a location that provides the best RF coverage.
Connect the CAT-5 cable to the base station and the Transceiver.
When the base station detects the presence of the Transceiver, there is a brief automatic configuration
process before the Transceiver takes over the radio function from the base station.
There are two RP-TNC antenna connectors on the top of the
transceiver allowing for connection of two half wave antennas or
alternate antenna configurations. Always ensure that two antennas
are securely connected for proper system operation.
The Transceiver antenna connectors are made to be water
resistant, so outdoor use is acceptable. The cable connections on
the bottom of the transceiver are not water tight, so always protect
from immersion. In severely blowing rain it may be prudent to
protect with an RF transparent cover such as a Ziploc bag.
Coaxial cable may be used to connect alternative antenna options.
See the Antenna Configuration section on page 25.
Pairs of Directional Antennas must
be aimed to cover the same area
- Table of Contents 3
- A/C Power Warning 9
- Thank you from Clear-Com 10
- Battery Safety 11
- Maintenance and Care 12
- Quick Start Guide 13
- General Description 15
- Theory of Operation 17
- System Features 19
- What’s In The Box 19
- Other Items You May Need 20
- Base Station 21
- Choose a Location 22
- Base Station Location 22
- Power Connections 23
- Antenna Location 24
- Antenna Configuration 25
- Configure the Base Station 28
- Adjust Sidetone 29
- Selecting a Frequency Band 30
- Name Each Station 32
- Front Panel Lock 34
- Call Function 34
- GPO Relay Contacts 35
- Auxiliary Input/Output 36
- Stage Announce (SA) 36
- Default Settings 37
- Controls 39
- Echo Cancellation Menu 41
- Auto-Null Explained 41
- Auto-Null Procedure 43
- Test for Echo 43
- Manual Null 43
- Other Causes of Echo 44
- 2-Wire Wiring Schemes 45
- 2-W Audio links 46
- Accu-Sync 49
- Master Mode 50
- Base Station Controls 54
- Front Panel Left 54
- 7- Volume Control 55
- 8- Menu Button 55
- 9- Enter Button 55
- 10- Buttons 1 - 5 55
- 11- LCD 55
- Front Panel Right 56
- 6- IN Level Control 57
- 7- OUT Level Control 57
- 8- USB Connector 57
- 10- Power ON/OFF Switch 57
- Rear Panel Left 58
- Rear Panel Right 58
- Base Station Menu 60
- Remote Transceiver 62
- Transceiver controls 63
- Beltstation 64
- Beltstation Setup 66
- Power Options 67
- Beltstation Power On/Off 67
- Pairing with a Base Station 68
- Name Equipment 70
- Personal Preferences 70
- Set Mic Gain 71
- Wireless ISO 72
- Beltstation Overview 73
- Talk Button A/B and C/D 75
- Beltstation Menu 76
- How Do I …? 77
- From the Beltstation: 78
- From the Base Station: 78
- From the beltstation: 78
- Trouble Shooting 79
- Tempest Remote Transceiver 82
- 4-Wire intercom systems 83
- Specifications 84
- FCC Information 87
- Tempest Part Numbers 90
- Glossary 91
- Limited Warranty 93
- ECHNICAL SUPPORT POLICY 96
- EPAIR POLICY 98
Powiązane produkty i podręczniki dla Domofony Clear-Com TEMPEST 2400
Domofony Clear-Com WBS-670 Instrukcje Operacyjne
(62 strony)
(62 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.090 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji