Clear-Com TEMPEST 2400 Dokumentacja Pobierz pdf (Strona 32)

100

Clear-Com Communication Systems Page 32 of 100

Tempest 2400 Wireless Intercom System

Set Display Mode to Static or Dynamic

The Static or Dynamic selection only affects the order that the base station LCD Operational screen

displays beltstation information. “Static” will be the preferred choice for users who want to ensure that a

beltstation that is logged in will always appear in the same location (slot) on the base station display and

are using only one base station.

“Dynamic” is the default setting. Dynamic display mode always displays beltstations in alpha-numeric

order by name, so “Dir” appears before “LitMgr”, which appears before “StgMgr”. Beltstations can change

slots depending on which beltstations are logged in at any given moment. Empty slots are always on the

right of the Operation screen. “Dynamic” is the preferred choice for users utilizing iSelect roaming

between multiple base stations.

On the base station, under Tech menu, in the “Display Slot Assignments” menu, choose Static or

Dynamic.

When selecting ‘Static’ slot assignments, you must

also enter the “Base Slot” section of the Tech Menu

on each beltstation and assign each beltstation a different slot (1 – 5).

Name Each Station

Name the base station with a descriptive name. This is especially helpful when iSelect Roaming will be

used to roam between base station coverage areas. The base station name can include up to 14

characters.

The base station name will appear on the Banner (top line of the base station display, with white-on-black

lettering), on the beltstation display, and in the beltstation’s menu under “Select Base”.

Name each beltstation with a descriptive name. This is especially helpful when the base station or T-Desk

is used to monitor and manage the beltstations. Prior to a name being assigned, a hexadecimal serial

number is displayed.

The beltstation will accept 14 characters in the name but only the first six characters of the beltstation

name can be displayed on the base station Operation screen. If the beltstation is named “Camera 1

” then

“Camera”

will be displayed on the base station slot for that beltstation because of the six character limit. If

the base station will be used to monitor and manage the beltstations, the beltstation name should be

limited to six characters.

On the base station press MENU and select “Base Station Settings” and “Name Base Station”.

Rotate the Volume control to move the underscore “_” to select the character to be changed.

Press Enter and notice the underscore changes to a pointer “Λ” under the selected character.

Rotate the Volume control to scroll through the character list. Press Enter to select the new character.

Characters always replace and never insert.

Repeat as needed.

Press Enter to save the new name after all characters are complete. Failure to press Enter to save will

clear all changes.

Press Menu to escape to the Operation screen.

Naming the beltstation works the same as naming the base station. On the beltstation press MENU and

select “Beltstation Settings” and “Name Beltstation”. Use the Volume control and the Enter button to

select and change characters. Press Enter to save the changes.

beltstation names can be changed wirelessly from the base station’s menu or from T-Desk when the

system is on a local area network.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 99 100

Komentarze do niniejszej Instrukcji

Brak uwag

Clear-Com TEMPEST 2400 Dokumentacja Strona 32

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Domofony Clear-Com TEMPEST 2400