Clear-Com TEMPEST 2400 Dokumentacja Pobierz pdf (Strona 64)

100

Clear-Com Communication Systems Page 64 of 100

Tempest 2400 Wireless Intercom System

Beltstation

The beltstation can be configured in three ways. It can be configured by the beltstation menu, wirelessly

by the base station menu, or using the PC interface called T-Desk. While many functions are available

through all three methods, certain features are only available through the beltstation.

Configure the Beltstation by the Beltstation Menu

Using a combination of controls and Menu settings you can set a variety of levels and options directly

from the beltstation controls. The multipurpose “CH A/B” and “CH C/D” controls operate differently

depending on the mode of the beltstation. In Operational Mode rotating the control adjusts the volume of

the audio of the local headset connected into the bottom of the beltstation. Turning the Volume control

clockwise increases the audio level while turning the control counter clockwise decreases the level.

Pressing the Volume control changes the selected intercom channel between channels A or B and C or

D. The intercom channel selected is indicated by two Channel Indicator LEDs located surrounding the talk

buttons, “TALK A/B” and “TALK C/D”.

In Menu Mode turning either Volume control allows the user to scroll through the menu options of the

current menu screen. Pressing either control selects the current menu option and is the same as pressing

ENTER. A menu item is not selected and will not take affect until the control, or ENTER, is pressed.

For example, to adjust the Sidetone setting:

• Connect a headset to the beltstation.

• Press MENU to enter Menu Mode.

• Rotate the CH A/B knob and scroll to “Set Controls”.

• Press ENTER to select, and scroll to “Sidetone”.

• Press ENTER to select the “Sidetone” adjustment.

You will see a numeric value between 0 – 99, and a level indicator. You should speak into the headset

microphone at a normal speaking level and adjust the sound of your own voice to a comfortable level by

rotating the CH A/B knob to adjust the Sidetone level. When satisfied, press ENTER to save the

adjustment. Press MENU to move up one level in the menu tree. Press MENU repeatedly to exit Menu

Mode and return to Operational Mode. If no other items are selected Menu Mode will automatically exit

and return to Operation Mode after a few seconds.

For additional information on the available beltstation menu settings, see the menu tree diagram and

details on page 76 of this manual.

Configure the Beltstation by the Base Station Interface

Many of the settings of the beltstation can be adjusted wirelessly from the base station. On the base

station press MENU, select beltstation Settings, and scroll to the required options. This feature allows the

communications engineer to control many of the beltstation’s functions without the need to remove the

beltstation from the user. Certain personal preference options such as Sidetone level are only configured

at the beltstation.

As an example, to adjust the Battery Alert on a beltstation, from the base station:

• On the base station, press MENU to enter Menu Mode

• Rotate the “Volume” knob to scroll to “Beltstation Settings” and press ENT.

• Select the beltstation to be adjusted and press ENT.

• Scroll to “Battery Alert” and press ENT to select the “Battery Alert” adjustment.

You will see options for ON and Off. Rotate the “Volume” knob to select your preference and press

ENTER to select. Confirm the selection on the beltstation display. Press MENU to move up one level in

the menu tree. Press MENU repeatedly to exit Menu Mode and return to Operational Mode. If no other

items are selected Menu Mode will automatically exit after three minutes.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 99 100

Komentarze do niniejszej Instrukcji

Brak uwag

Clear-Com TEMPEST 2400 Dokumentacja Strona 64

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Domofony Clear-Com TEMPEST 2400