Clear-Com TEMPEST 2400 Dokumentacja Pobierz pdf (Strona 68)

100

Clear-Com Communication Systems Page 68 of 100

Tempest 2400 Wireless Intercom System

Pairing with a Base Station

Pair Beltstation to Base Station:

Confirm that the base station is powered on and in Operational Mode (not

in Menu Mode) and that the beltstation is powered off. Confirm that the

base station’s Network Number and Lockout Key are adjusted as needed.

See the section on Set Network Number and Lockout Key on page 31.

Plug one end of the Pairing cable into the base station and the other end

into the beltstation.

The pairing cable is a standard 3.5mm

(1/8 in.) male to male stereo patch cord

Turn the beltstation power on by pressing and holding the beltstation Power ON/OFF button for two

seconds. The Pairing process will begin automatically. Watch for the message “Pairing Complete” to

appear briefly on the beltstation display. The beltstation will automatically re-initialize.

Adjust Beltstation Slot

The base station slot assignment only affects the order that the base station Operational screen displays

beltstation information when the base station is in the Static display mode. If the base station is routinely

used as a communication port or for monitoring beltstations, it may be more convenient to always have

the same user appear in the same position on the base station display. This is a personal preference

setting.

In the base station Tech menu, choose Static or Dynamic from the “Display Slot Assignments” screen.

‘Dynamic’ the default, will work without any adjustment, and always displays beltstations in alpha-numeric

order by name.

“Static” will be the preferred choice for users who want to ensure that a beltstation that is logged in will

always appears in the same location (slot) on the base station display and are using only one base

station. When selecting ‘Static’ slot assignments, you must also enter the Tech Menu for each beltstation

and assign each beltstation a different slot (1 – 5).

The base station default is for Dynamic Slot Assignment. This means that when beltstations log in to a

base, the information about the beltstations is displayed on the base station LCD screen in alpha-numeric

order according to the name of the beltstation-- “Dir” appears before “Light1”, which appears before

“StgMgr”, but they can change slots depending on which beltstations are turned on. If the default settings

are used, nothing is necessary. If the base station is located in an equipment room and is not routinely

used as a communication port or to manage beltstations, nothing is necessary.

Adjusting so that each beltstation always appears in the same position of the base station display is a two

step process:

1. Advance to the base station’s “Display Slot Assignment” section of the “Tech Menu” and select

“Static”.

2. In each beltstation, advance to the “Base Slot” section of the “Tech Menu” and adjust each

beltstation to a different slot (1 – 5). The beltstation designated to slot 1 will always appear on the

far left of the base station display, with slot 2 appearing in the next position to the right, and so on.

In “Static” mode, if a beltstation is not turned on, or is logged out due to being out of range, the base

station LCD will display a very obvious X, making it easy to see at a glance, which beltstations are

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 99 100

Komentarze do niniejszej Instrukcji

Brak uwag

Clear-Com TEMPEST 2400 Dokumentacja Strona 68

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Domofony Clear-Com TEMPEST 2400