Clear-Com TEMPEST 2400 Dokumentacja Pobierz pdf (Strona 36)

Clear-Com Communication Systems Page 36 of 100

Tempest 2400 Wireless Intercom System

Auxiliary Input/Output

Auxiliary IN can be used to bring program or other audio into the Tempest base station. Audio supplied to

the Aux IN Connector can be assigned to any combination of the four intercom channels with individual

volumes for each channel at the “Aux In/Out Assignment/Level” menu. Audio from the Aux IN port is

routed only to wireless users and is not routed out to the hardwired system.

Audio from the Auxiliary OUT Connector can be assigned from any combination of the four intercom

channels with volume control at the “Aux In/Out Assignment/Levels” menu.

While in the “Aux In/Out Assignment/Level” menu, the front panel channel select (SEL) button is used to

advance through the channels, and the IN Level Control is used to adjust the Aux In volume. The OUT

Level control is used to adjust the Aux Out volume (page 57). Adjust to “0” to restrict audio from a

channel.

The Aux IN and OUT connectors are ¼” Tip/Ring/Sleeve jacks that accept standard ¼” TRS plugs. The

Aux IN and OUT connections are balanced and transformer isolated and operate at a nominal line level

audio of - 4 to + 8 dBu.

Stage Announce (SA)

The Stage Announce (SA) function in the Tempest base station is used to send a wireless beltstation

microphone signal to a dedicated external audio output. When a wireless user presses the Stage button

on the beltstation, their audio is re-routed from the selected intercom channel(s) and is sent to the base

station rear panel SA connector. In addition, a relay closure contact is available on the RELAY connector

on the back of the base station. Pressing the Stage button enables the headset microphone regardless of

the status of the Talk buttons. If enabled, all beltstations can access this feature.

The Stage Announce output connector is an XLR-3M. The Stage Announce connector is balanced and

transformer isolated and outputs nominal line level audio from -4 to +8 dBu. The Stage Announce

connector output level can be adjusted at the Stage Announce screen.

In addition the Stage button may be configured to also control an additional relay assigned to the users

beltstation. See the GPO Relay section for more details.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 99 100

Brak uwag

Clear-Com TEMPEST 2400 Dokumentacja Strona 36